Automating Lights with PIR sensor and Arduino on Fedora

This is POC post about how you can start automating lights or a rooms , staircases and much more smartly and then normal switchboards do. The whole point of illuminating a room is to make sure the people who go in stay fine because , entering a dark room for many people is a task not for the chicken heart.

Lets first start with the requirements:
1. Arduino as basic as UNO should be fine
2. A bunch of wires
3. Couple of LED (in case you fry by ignoring the ground )
4. A PIR sensor

Let's jump right in:
1. First of all , you need an editor/IDE . For Arduino there is Arduino IDE , you can grab a free copy of the same from
2. Once you grab the files , you can either extract it manually or just let the File manager on your Fedora handle the situation for you.

3.Once that you are done , you need to install the IDE.

Once the Arduino IDE is installed , just go ahead and check for two most important things under Tools in Arduino IDE

Ports : It should point to Arduino UNO (in my case)
Boards: This should give you a list of boards and your board should be selected.

The code that needs to uploaded is

 This is the important part , for me I have the light which I want to light up is at Pin 13.

The PIR will have 3 pins , (from the left)
1. The VCC pin goes to the 5V of the Arduino
2. The Output pin to Digital pin 3
3. The Ground PIN to the Ground Pin

Resultant connection will look like :

If you get everything right:

Hit upload on the Arduino IDE and the code will be uploaded. The result will be that the PIR sensor will be able to detect motion and turn the LED value to HIGH or LOW .


Popular posts from this blog

Rocket on Fedora

How to create live USB with Fedora Media Writer on Windows 8.1

WebVr in Fedora/RHEL 25 Pre Release